Skip to main content
Import - Shift4

Fingerprint Guide in POSitouch

  1. Last updated
  2. Save as PDF

Description:  Learn how to do the initial scanning and the use of fingerprints in POSitouch. 

Initial Scan of Fingerprint

  1.  Enter the user number, then select FINGERPRINT.     
     
    clipboard_bffef24d-0f4b-4060-8ec6-07c0a846cc56.png
     
  2. Select Add POS User. Select a user from the list.

    image (1).png

  3. Press and release the same finger on the scanner until all boxes display prints.

    image (2).png

  4. Confirm Scan and Save.
    1. Confirm scanning is complete when all prints display “Good”.
    2. Select Save New Scan.
    3. Select Quit. 

      image (3).png

Rescan Fingerprint

  1. Enter the user number, then press FINGERPRINT. 

    image (4).png

  2. Select the user record.
    1. Using the arrow buttons, find the desired employee. (Clark Kent in this example.)
    2. Select Rescan Prints and rescan their fingerprint.
    3. Select Save New Scan.
    4. Select Quit.

      image (5).png

Make an Employee Inactive

  1. Enter the user number, then press FINGERPRINT.

    image (6).png

  2. Select user to remove.
    1. Using the arrow buttons, find the desired employee.
    2. Select -.
    3. Select Quit.

      image (7).png

  3. From the Back Office computer, navigate to Time and Attendance > Employees.


    image (8).png
  4. Select the user to inactivate.
    1. Select Go To…
    2. Enter last name or employee number.
    3. Select OK.

      image (9).png

  5. Select Immediate System Change.

    image (10).png

  6. Select Continue.


    image (11).png
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Page type
    Topic
  2. Tags
    This page has no tags.