7. Confirm the Default Gateway is set to 192.168.213.1 (when using the TP-LINK Router). If the Gateway is anything else, you will need to change it:
-
- Scroll down to the Default Gateway, then press Enter to manually type in the new Gateway.
- Enter “192.168.213.1” and press Enter again to save the changes.
8. Select the ESC key to leave the Setup Screen. When prompted, press Y on the keyboard to save the settings to the Bump Bar.
9. Once settings are saved, unplug the power to the bump pad and unplug the keyboard.
10. Plug the power back in without the keyboard connected.
11. Check ChefXML settings and set up everything for the KVS to show online.
Change Bump Bar IP Address without Keyboard
If you are unable to locate a keyboard, follow these steps using the Bump Bar:
- Hold CLR and 0 to boot to the SEC Enhanced Setup Mode (bottom left and right buttons).
- Use Buttons 9/0 is to toggle through the options.
- FUNC Key = enter/proceed
- Use 0-9 to enter the numerals of the IP
- Use the ESC key to enter a period (.)
- CLR Key = Backspace
- Once the IP is in place, select FUNC.
- Make sure the “default gateway” and “System type” are also correct.
- Select ESC to save the settings, CLR = Yes and HELP = N0. BumpBar should reboot.
- Check ChefXML settings and setup everything for the KVS to show online.